Factory-direct heavy-duty storage configurations customized for Indonesian logistics parks, cold chain facilities, and manufacturing plants.
Back-to-Back Pallet Racking is the foundational layout architecture for modern logistics centers requiring a precise equilibrium between 100% pallet selectivity and maximized floor space utilization. By connecting two single-entry selective rack runs back-to-back using specialized structural row spacers, warehouse operators eliminate superfluous aisle space while enhancing the lateral rigidity of the entire racking matrix.
In high-density industrial logistics, back-to-back configurations serve as the backbone for standard reach trucks, narrow aisle (VNA) systems, and double-deep pantograph reach trucks. When engineered with Q235B or Q355B high-tensile cold-rolled steel profiles, these systems accommodate uniform distributed loads (UDL) up to 4,500 kg per beam level and frame capacities exceeding 24,000 kg.
Standard technical profile for SolidFort export-grade back-to-back systems supplied to the Asia-Pacific market:
Indonesia’s booming manufacturing sector and rapid supply chain modernization require racking structures specifically adapted to tropical environmental conditions, high humidity, and strict seismic zone regulations.
In key distribution centers across Karawang and Cikarang, high-velocity SKU turnover demands back-to-back selective racking paired with wire mesh decking. This ensures strict FIFO inventory rotation, high cleanliness, and compliance with Indonesian BPOM and Halal warehousing protocols.
For cold storage facilities operating in North Jakarta (Tanjung Priok area) and Surabaya handling frozen seafood and dairy, we provide heavy-duty hot-dip galvanized back-to-back and push-back frames resistant to sub-zero oxidation and humidity condensation.
Industrial tier-1 suppliers in West Java require heavy-duty loading (up to 3,000kg/level) for heavy metal stamping dies, auto parts, and raw materials, requiring customized beam profiles and heavy-column floor anchoring.
Designing industrial racking systems for Indonesia requires addressing two critical natural challenges: intense seismic activity along the Pacific Ring of Fire and high tropical ambient humidity.
Indonesia’s major industrial zones on Java and Sumatra are subject to significant seismic forces. SolidFort designs back-to-back upright frames using Finite Element Analysis (FEA) compliant with ANSI/RMI MH16.1 and FEM 10.2.02. Upright footplates are enlarged and anchored into concrete slabs using high-embedment chemical anchor bolts to withstand seismic acceleration values up to 0.4g.
Relative humidity in Indonesian coastal manufacturing regions frequently exceeds 80%. SolidFort applies a 9-stage pre-treatment wash followed by a 60–80 micron high-durability electrostatic thermosetting powder coating. For aggressive maritime atmospheric conditions, full hot-dip galvanizing conforming to ISO 1461 is available.
Importers purchasing racking systems from SolidFort benefit from preferential duty rates under the ASEAN-China Free Trade Area (ACFTA). We supply authentic Form E Certificates of Origin, allowing Indonesian buyers to import heavy-duty steel pallet racks with 0% or substantially reduced import duty taxes at Tanjung Priok or Tanjung Perak ports.
Compare technical metrics to determine whether Single Selective, Back-to-Back, Double Deep, or Push Back Racking fits your warehouse ROI goals.
| Racking System Type | Selectivity | Storage Density | Aisle Width Required | Forklift Compatibility | Est. Cost / Pallet Position |
|---|---|---|---|---|---|
| Standard Single Selective | 100% | Standard (40-50%) | 3.0m - 3.5m | Standard Counterbalance / Reach | USD 45 - USD 75 |
| Back-to-Back Racking | 100% | High (60-65%) | 2.8m - 3.2m | Standard Reach Truck | USD 50 - USD 85 |
| Double Deep Back-to-Back | 50% | Very High (70-75%) | 3.0m - 3.3m | Deep-Reach / Pantograph Truck | USD 65 - USD 110 |
| Push Back Racking System | LIFO (Low) | Maximum (75-85%) | 2.8m - 3.0m | Standard Counterbalance | USD 110 - USD 220 |
| Drive-In / Drive-Thru Racking | LIFO / FIFO | Maximum (80-85%) | Drive-In Channels | Narrow Counterbalance | USD 95 - USD 180 |
SolidFort Storage Equipment Co., Ltd. is a premier factory-direct racking manufacturer operating from a modern 30,000㎡ production center in Xiamen, China. Since 2016, we have supplied engineered structural racking systems to over 53 countries worldwide.
We eliminate middleman markups while enforcing rigorous quality standards. From raw steel coil roll-forming to robotic welding, automated powder coating, and custom container loading, every step undergoes strict ISO 9001 quality audits.
Expert insights addressing technical specification, customs, shipping logistics, and structural safety questions for importing racking systems into Indonesia.
Budgeting for back-to-back pallet racking typically ranges between USD 50 and USD 85 per pallet position for material supply. Total project cost depends on frame height, beam span, required uniform load capacity (e.g., 1,000kg vs 3,000kg per level), and surface finish (powder coated vs hot-dip galvanized). Freight charges to Tanjung Priok (Jakarta) or Tanjung Perak (Surabaya) and local installation are quoted transparently per project.
Indonesia lies within high-risk seismic zones. Our structural engineers calculate upright column stress, frame bracing shear resistance, and anchor bolt depth based on international ANSI/RMI MH16.1 and AS4084 seismic formulas. We utilize heavy-duty floor baseplates, back-to-back row spacers, and chemical expansion anchors tailored to your concrete slab depth (minimum 150mm–200mm slab thickness recommended).
Yes. As a certified Chinese exporter, SolidFort issues official Form E (ASEAN-China Free Trade Area Preferential Tariff Certificate of Origin). Presenting Form E to Indonesian Customs (Bea Cukai) enables buyers to import heavy-duty steel pallet racking at preferential import duty rates (often 0% to 5%), significantly lowering total project procurement costs.
We offer flexible shipping terms including FOB, CIF, and DDP (Delivered Duty Paid). Standard production takes 10 to 15 days. Ocean shipping from Xiamen port to Tanjung Priok (Jakarta) or Tanjung Perak (Surabaya) typically takes 7 to 12 days direct sea transit. Complete container loading diagrams are provided with every shipment to ensure straightforward unloading at your facility.
Single selective racking consists of standalone single runs separated by aisles. Back-to-back pallet racking connects two single runs back-to-back using rigid steel row spacers. This configuration doubles storage depth per aisle set, reduces overall footprint consumption by 30-40%, and significantly improves structural frame stability without restricting 100% immediate pallet access.
Yes. While standard 1200mm x 1000mm (ISO/GMA) and 1200mm x 800mm (Euro) pallets are widely used, we frequently manufacture custom frame depths (e.g., 900mm, 1000mm, 1100mm) and custom beam lengths (e.g., 2300mm, 2700mm, 3300mm, 3900mm) to accommodate specialized plastic, wooden, or steel pallets used in Indonesian manufacturing.
Simply click the "Get Catalog" button to connect with our engineering department. Provide us with your warehouse dimensions (length, width, clear height), pallet load weights, forklift turning radius, and building column locations. Our engineering team will return a detailed 2D/3D CAD layout proposal and accurate quotation within 24 hours.